Windom Extreme VS

HomeHome  Welcome PageWelcome Page  CalendarCalendar  GalleryGallery  FAQFAQ  SearchSearch  MemberlistMemberlist  UsergroupsUsergroups  RegisterRegister  Log inLog in  

Share | 

 Local/Custom Battle Mode: 2-player/Multi-player Tutorial

View previous topic View next topic Go down 

文章數 : 22
積分 : 1897
威望 : 0
注冊日期 : 2012-07-03
年齡 : 30

PostSubject: Local/Custom Battle Mode: 2-player/Multi-player Tutorial   Mon Oct 15, 2012 9:11 pm


I just figured out how to play 2 (or more) player mode (using either keyboard or gamepads). So I made this tutorial if there is somebody especially newbies would like to battle for their own or with their friends/families...

(Note: This tutorial uses the Extreme VS mod for reference, credits to the modders...)

STEP #1:
Ensure to adjust controls in game startup settings window first! (But you also need to check if your gamepads are recognized by your PC and test the buttons in Control Panel!) Thanks to Skiermish (Ref: Here), let me edit the configuration layout a bit for gamepad/joypad:

Basic Movements (No need to adjust in startup key config window):
left = left keypad
rigth = right keypad
up = up keypad
down = down keypad
(Note: by default, the left analog stick (if yours had it) controls are same with keypad movements above)

Attack/Additional Movements (My setting, ala GvsG Style, obviously buttons 1~4):
button 1 = Change target (Equivalent to PSx keypad: Triangle, XBox keypad: Y)
button 2 = 2nd weapon (Sword/Close Range) (Equivalent to PSx keypad: Circle, XBox keypad: B)
button 3 = Jump/Thrust/Boost Dash (Equivalent to PSx keypad: Cross/X, XBox keypad: A)
button 4 = 1st weapon (Gun/Long Range) (Equivalent to PSx keypad: Square, XBox keypad: X)
button 6 = Guard/Transform (Equivalent to PSx keypad: R1, XBox keypad: RBumper)
button 5 = Subattack 1 (Equivalent to PSx keypad: L1, XBox keypad: LBumper)
button 7 = Subattack 2 (Equivalent to PSx keypad: L2, XBox keypad: LTrigger)
button 8 = Subattack 3 (Equivalent to PSx keypad: R2, XBox keypad: RTrigger)
button 9 = Back/Cancel (Equivalent to "Select" Key )
button 10 = Select/OK (Equivalent to "Start" key)
(Note: by default, the right analog stick (if yours had it) controls depends to button 1 ~ 4 only)

In the keyconfig window, make sure you edit each of the players controllers. The dropdown menu on top of the window will lists players available/recognized by the game.
Note: It is possible to set both keyboard and gamepad settings for each player, so you had some choices on what devices you could use to play the game)

Hit "Save" button if you're done.

STEP #2:
2 player mode only available for Arcade/Story Mode (could help you finish missions easily with some help from your friend/family!) and Local Battle/Custom VS Mode!

STEP #3:
To play in Custom VS mode, after select the "Local Battle Mode" in the main menu, the game will bring you to the first page:

Page 1: "Battle Settings"

You should see at least two panels (blue & red) in the game. These panels represents available players (which means the blue and red panel was basically for player 1 and 2 by default). You can create up to 4 players only. The settings for this page was a bit odd, since it only consists "Select" (Default key: Enter/Button 10), "Cancel" (Default key: Esc/Button 9), and control keys (Default arrow keys/pad).

Each panel had the following settings bar (from top order):
Mecha: Unit selection, assign your favourite mech to play
Pilot: Pilot selection, assign the mechs' pilot/voice
Team: Team number, the reason why the panels are coloured; these represents alliance. There are 4 teams available; 0 (Blue), 1 (Red), 2 (Green), 3 (Yellow). No matter what colour you pick, any player shares same colour will be considered as allies. (Funny glitch: What would happen if you set all players with same colour? Try it! XD)
Player: Player types. Three selections; Player (human-controlled), CPU (PC-controlled, up to 10 levels of AI), and None (assign none).
Go: If you have done above settings, press "Select" key and the word "Go" will become "Ready!", which means this player had done all above settings (and the settings will be 'locked') If all players had been set with "Ready!", the game will move to next page. However, if you need to do some changes, you can still press "Select" key again (at this bar) and revert to "Go", before modifying the above settings.

To begin, select any panel you want to edit with arrow keys/pad, then press "Select/OK"
Adjust each settings above. Up/Down keys will shift setting upwards/downwards, Left/Right will choose what mech/pilot/team/player type you want.
If you have done, select "Go" setting (or just press your "Select/Key" to select it automatically) and press "Select/OK" key to set "Ready!"
Press "Cancel/Back" key once to choose other panel. (WARNING! Press "Cancel/Back" carefully or you will be back to the main menu and you need to set everything again!)
Repeat above steps for other players.

To enable 2P (Player 2), the 2nd player must press "Start" in his/her key controls/gamepad, before adjusting his/her settings (and do as same as above). He/She MUST also use the second panel ONLY, because that is the ONLY way the game recognizes Player 2! This same rule also applies to Player 1 who must use the first panel to be 1P (Player 1 in game)! (Note: I did not test to play up to four human-players for Local Battle Mode yet, but I believe it is possible...)

If everything done (all players are "Ready!"), you will go to next page:

PAGE 2: "Game Settings"

There are 5 settings:
Gamemode: There are 2 modes only; Survival (Play till other player loses all its lives, lives depends to mech's lives edited in Script.spt) and Cost Battle (Each team had a cost meter, effected by mech(s)' HP; the higher mech(s)' HP, the higher chance of meter being depleted. Game ends if other team's meter depleted)
HP: Health Point multiplier, the higher the points, the higher the mech's HP (and the longer time you will need to finish your game Very Happy ). Min: x0.1, Max: x10.0.
Generator: Boost power multiplier, the higher the points, the faster the mech(s)' boost. Min: x0.1, Max: x10.0.
War Power (Cost Battle): Cost Meter multiplier (valid if you select "Cost Battle" game mode only). The higher the points, the higher the meter (and the longer time you will need to finish your game too! Very Happy ). Min: x0.1, Max: x10.0.
Location: Mechs' starting point when the game begins. Two selections; Default (Depends to default coordinates set in selected map's Script.spt file) or Random (You will be automatically dropped on random locations in map).

Same as the first page, Up/Down keys will shift setting upwards/downwards, Left/Right will choose what the values you want. After done all of these settings, press "Select/OK" key (on any settings) to go to next page.

PAGE 3: "Map Selection"

Same as in the game's Practice Mode and Team Battle Mode, you will need to select any maps available in your game. Choose with Left/Right controls and hit "Select/OK" if done...
(Note: You can still go back to previous game settings pages if you still did not hit "Select/OK" in Page 3 "Map selection")
(Note: Too bad there's no BGM selection page...)

... after some loading, THE GAME BEGINS! ENJOY! Split Screens for both/all players convenience! (CPU-controlled players will never get its own screen... what for?)

Other Tips/Infos:
- During gameplay, only Player 1 are able to go to "Pause menu" by pressing his/her "Cancel/Back" key. The in-game camera mode are also available, but still, only Player 1 could do it...

- If you think the game screen resolution was not fitting during multiplayer gameplay (i.e.: 2-player split screen looks "squashed"), you should adjust the resolution during the startup settings window first.
- When the game ends, you will be brought to the first page with all your previous game settings, so you should not worry of losing your recent settings and you could adjust a bit for next battle. Unless you accidentally pressed the "Esc/Cancel" button... Very Happy
Back to top Go down
View user profile
Local/Custom Battle Mode: 2-player/Multi-player Tutorial
View previous topic View next topic Back to top 
Page 1 of 1
 Similar topics
» Any way around local multi-player region lock?
» PS3 WFC Multi-Player help!
» Key points in creating a multi-player card game as beginner in Unity3d
» Battlefoam just doesn't work
» The 2 player game-player's guide to 2 player games...

Permissions in this forum:You cannot reply to topics in this forum
Windom Extreme VS :: UKXP Data :: UKXP Tutorial-
Jump to: